What is HydroChill Infill? How is it Used on Artificial Grass?

HydroChill Infill is a specialized infill for artificial turf that incorporates advanced evaporative cooling technology and antimicrobial protection. This infill is designed to significantly reduce the surface temperature of artificial grass, making it more comfortable and safer to use in hot climates. The evaporative cooling effect is achieved through moisture retention; when water is added to the turf, either through rainfall or a manual application, the HydroChill Infill absorbs it. As the temperature rises and the water begins to evaporate, it naturally cools the surface of the turf, much like the cooling effect of sweat on skin.

In addition to its cooling properties, HydroChill Infill also includes antimicrobial agents that help to prevent the growth of bacteria and odors, a crucial feature for maintaining a hygienic surface, especially in pet-friendly or high-traffic areas. Like traditional infill, HydroChill serves several important roles in artificial turf installations: it acts as a ballast to keep the turf in place, helps to keep the synthetic turf fibers upright for a natural and aesthetically pleasing look, and assists in turf drainage by allowing water to filter through the turf to the ground beneath.

Furthermore, its unique texture and composition contribute to emulating the feel of natural grass underfoot. The combination of cooling technology, antimicrobial protection, and traditional infill functions makes HydroChill Infill a versatile and innovative choice for enhancing the performance and comfort of artificial turf installations.

What is HydroChill Infill Made Of?

HydroChill infill is a specialized type of artificial turf infill that is primarily made of silica sand coated with a moisture-activated cooling technology. This coating is the key to HydroChill’s unique ability to reduce turf temperatures. The technology works on the principle of evaporative cooling, similar to the natural process of perspiration in the human body. When water (either from rainfall or applied manually) interacts with the HydroChill infill, it activates the coating, which retains the moisture. As the temperature rises and the water begins to evaporate, this process draws heat away from the turf, significantly reducing its surface temperature.

This infill also often includes antimicrobial additives to help inhibit the growth of bacteria, mold, and mildew, which can be especially beneficial in dog runs & potty areas or high-traffic sports fields. The combination of silica sand and the cooling technology coating makes HydroChill an innovative solution for hot climates where artificial turf might otherwise become uncomfortably warm. By incorporating this advanced infill into artificial grass installations, users can enjoy a cooler and more comfortable surface while maintaining the benefits of durability and low maintenance that come with artificial turf.

How Much HydroChill Do I Need Per Square Foot?

The amount of HydroChill infill needed per square foot of artificial turf can vary based on the specific type of turf and its intended use, but a general guideline is typically around 1.5 to 3 pounds per square foot. The exact amount can be influenced by factors such as the pile height of the turf, the density of the grass fibers, and the level of cooling desired.

For most residential and commercial applications, aiming for the lower end of this range (around 1.5 pounds) can be sufficient to achieve the desired cooling effect while ensuring proper support and stability for the turf fibers. In areas with higher temperatures or more intense sun exposure, or for sports fields where a significant cooling effect is desired, the higher end of the range (up to 3 pounds) might be more appropriate. It’s important to evenly distribute the HydroChill infill across the turf to ensure consistent coverage and maximum effectiveness. Additionally, consulting with the turf manufacturer or a professional turf installer is recommended to get specific guidance tailored to your particular turf product and installation conditions.

HydroChill Infill Closeup

How Should I Use HydroChill Infill?

Using HydroChill infill effectively involves a few key steps during and after the installation of artificial turf. Initially, the HydroChill infill should be evenly distributed over the turf once it has been laid out and secured. This process is similar to spreading traditional infill – it’s evenly scattered across the surface and then brushed into the turf fibers using a power broom. The quantity used should align with the manufacturer’s recommendations, usually about 1.5 to 3 pounds per square foot, depending on the turf’s pile height and density. The goal is to ensure that the infill is sufficiently integrated into the turf to provide stability, keep the fibers upright, and enable the cooling effect.

After installation, the key to activating HydroChill’s cooling properties is moisture. When the turf and infill become hot, watering the surface activates the HydroChill infill, initiating the evaporative cooling process. This can be done manually with a hose or through a sprinkler system, or it can occur naturally with rainfall. The frequency and amount of water needed for activation will depend on the climate and the level of sun exposure the turf receives. It’s important to note that the cooling effect is temporary and will last until the moisture in the infill evaporates, so reapplication of water may be necessary on hot days or in dry climates. Regular maintenance, such as brushing to keep the fibers and infill well-distributed, also helps maintain the effectiveness of the HydroChill infill over time.

How Much Does HydroChill Cost?

The cost of HydroChill infill can vary based on factors such as the supplier, location, and quantity purchased. HydroChill infill typically range from around $0.50 to $1.00 per pound. However, it’s important to note that prices can fluctuate and may be different in your specific area or at the current time.

When calculating the total cost for a project, it’s essential to consider the amount of infill needed for the size of the turf area. Given that the recommended application rate is usually between 1.5 to 3 pounds per square foot, the cost can add up, especially for larger installations. For instance, for a 500-square-foot area, you might need anywhere from 750 to 1,500 pounds of HydroChill infill, translating to a total cost in the range of $375 to $1,500, depending on the exact price per pound. It’s advisable to get a quote directly from turf suppliers or local turf installers for the most accurate and up-to-date pricing. Additionally, some suppliers may offer discounts for bulk purchases, which can be beneficial for larger projects.

HC_illustration
Coolingsand-hydrochill_11690_-03

How Long Does HydroChill Last?

HydroChill infill is designed to last as long as the artificial turf itself, typically ranging from 5 to 10 years or more, depending on various factors like the quality of the turf, the intensity of use, and maintenance practices. The longevity of HydroChill is closely aligned with the durability of the artificial grass fibers, ensuring that its cooling and antimicrobial protection remain effective throughout the lifespan of the turf. The unique aspect of HydroChill is its ability to be recharged with moisture, either through rainfall or manual watering, to maintain its evaporative cooling effect.

However, the effectiveness of HydroChill can diminish over time if not properly maintained. Regular maintenance, such as brushing the turf to keep the fibers upright and evenly redistributing the infill, can extend the life and effectiveness of HydroChill. The infill may also need to be replenished or refreshed over the years, especially in high-traffic areas where it might get compacted or displaced. While the exact lifespan can vary, with appropriate care and maintenance, HydroChill infill can effectively provide its cooling and antimicrobial benefits for the majority of the artificial turf’s usable life.

Grow Your Business With Us. Become a Turf Network Pro Today!

Find new customers and grow your business with the Turf Network!

Questions?
Click Below to Download
Turf Network's
Exclusive Hiring Guide is Now Available!
Guidelines & Tips
Image Clarity

Headshot (Listing Preview) images should be no smaller than 800 x 900 px and Headshot (Listing Page) images should be no smaller than 160 x 160 px, with the subject matter as centered as possible to avoid being cut off at the edges.

Image Size Limits

Images can have a maximum file size of 1 MB. Should you need to compress your images, no problem! Here’s a free tool with super simple instructions.

  1. Open Squoosh.
  2. Upload an image.
  3. Choose WebP from the dropdown.
  4. Download your optimized image.
Guidelines & Tips
Image Clarity

Logos should be no smaller than 160 x 160 px, with the subject matter centered as possible to avoid being cut off at the edges.

Image Size Limits

Images can have a maximum file size of 1 MB. Should you need to compress your images, no problem! Here’s a free tool with super simple instructions.

  1. Open Squoosh.
  2. Upload an image.
  3. Choose WebP from the dropdown.
  4. Download your optimized image.
Guidelines & Tips
Image Clarity

Cover and Gallery images should be no smaller than 1920 x 1080 px for the best clarity, and the subject matter should be as centered as possible to avoid being cut off at the edges.

Image Size Limits

Images can have a maximum file size of 1 MB. Should you need to compress your images, no problem! Here’s a free tool with super simple instructions.

  1. Open Squoosh.
  2. Upload an image.
  3. Choose WebP from the dropdown.
  4. Download your optimized image.